| | | | | |
 
Pressed Stainless Steel Water Tank

General Specifications :
   
Standard : PIPECO pressed stainless steel sectional water tank constructed with hydraulically pressed flanged panels confirm to SS 22: 1979 and BS:C564: 1975
   
Materials : The tank panel, stays and cleats are made from Stainless Steel Grade 316
   
Flanges of Plates : The tank plates are pressed with a combined double flange at an angle of 45 degree and 90 degree to the face of the plate on four sides.
   
Bolts, Nuts and Washers : Stainless Steel Grade 316 bolts, nuts and washers.
   
Jointing Materials : Non toxic PVC foam to be used for all jointing between tank panel flange.
   
Tank Cover : Panel type tank cover supported by trusses and poles 600 x 600 square manhole supplied as standard for each compartment.
   
Water Level Indicator : Transparent tube with aluminium casing and height level making.
   
Nozzles for Connection : Short pipe with flange or socket for all pipe connections.
   
Ladder : Internal ladder shall be made of Stainless Steel 316 and aluminium for external ladder.
   
   
Standard Thickness for 1.22m x 1.22m Tank Panel
Type
1.22m (H)
2.44m (H)
3.66m (H)
4.88m (H)
  roof panels
2mm
2mm
2mm
2mm
  4th side panels
3mm
  3rd side panels
3mm
3mm
  2nd side panels
3mm
3mm
4.5mm
  1st side panels
3mm
3mm
4.5mm
4.5mm
  Bottom panels
3mm
3mm
4.5mm
4.5mm
   
Standard Thickness for 1m x 1m Tank Panel
Type
1.0m (H)
2.0m (H)
3.0m (H)
4.0m (H)
  roof panels
2mm
2mm
2mm
2mm
  4th side panels
3mm
  3rd side panels
3mm
3mm
  2nd side panels
3mm
3mm
4.5mm
  1st side panels
3mm
3mm
4.5mm
4.5mm
  Bottom panels
3mm
3mm
4.5mm
4.5mm
   
   
 
©2011 PIPECO INTERNATIONAL SA (PTY) LTD. All rights reserved | Privacy Policy